Tactlok's Nut is preferred for its High Pressure applications and leak proof seals. These Nuts are used to connect a Tube and Fitting/ Valve or Process Connection. Available in a variety of range, material and grades as per below chart.
1/16" to 2" and 1mm to 50mm
Stainless Steel, Carbon Steel, Alloy Steel, Inconel®, Incoloy®, Monel®, Hastelloy®, Duplex, Super Duplex , SMO® 254, Titanium, PTFE, Copper Alloys
Power, Railways, Cement, Chemical, Oil & Gas, Petrochemicals & Fertilizers, Turnkey & EPC, Defence, Marine, Aerospace, Lubrication Sytems, Paper Mills etc.,
End Connection 1
Max. Pressure Rating
Upto 10000PSI / 700BAR
MATERIAL OF CONSTRUCTION
Grades: ASME / ASTM SA / A182 SA 304, 304L, 316, 316L, 304/304L, 304H, 316H, 316/316L, 321, 330, 347, 309/S, 310/S, 317/L, 410/S, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404, SS 304/L, SS 316/L, SS 310, SS 321, SS 347H, SS 317L, SS 410, SS 416, SS 420, SS 430, SS 904L, SS 17-4-PH, SS 15-5-PH
Grades: Nickel 200, Nickel 201
Grades: Monel® 400, Monel® 401, Monel® 404, Monel® K500, Monel® R-405
Grade: Inconel® 600, Inconel® 601, Inconel® 602, Inconel® 625, Inconel® 725, Inconel® X750, Incoloy® 800, Incoloy® 825
Grades: Hastelloy® C276, Hastelloy® C22, Hastelloy® B2, Hastelloy® G30, Hastelloy® G35
Titanium Grade 1, Titanium Grade 2, Titanium Grade 3, Titanium Grade 5
Duplex & Super Duplex Steels
Grade: UNS S31803, UNS S32205, UNS S32750, UNS S32760, UNS S32950, A182 F51, A182 F55, A182 F44, A182 F60
Grades : ASTM SA 182 - F11, F22, F91, F9, P11, P22, P91, P9, P5, P92, EN42J, EN8, EN19, AISI 4130, AISI 4140, AISI 4340
Grades : ASME / ASTM SA / A 105, ASME / ASTM SA / A 350 LF2
FAST MOVING MATERIALS & GRADES - Nut
Stainless Steel Nut
SS 304/ 304L Nut
A182 F53 Nut
Carbon Steel Nut
SS 316/ 316L Nut
A182 F44 Nut
Alloy Steel Nut
SS 904L Nut
A182 F55 Nut
UNS S32205 Nut
UNS S31803 Nut
Inconel® 600 Nut
UNS S32750 Nut
Inconel® 625 Nut
UNS S32760 Nut
Inconel® 800 Nut
Super Duplex Nut
Inconel® 825 Nut
SMO® 254 Nut
Titanium Grade 5 Nut
Titanium Grade 2 Nut
A182 F51 Nut
SMO® 254 Nut
High Pressure Nut
A350 LF2 Nut
SS 317L Nut
OUR USP FOR NUT
We have been dealing in Nut since almost a decade. Our approach towards any requirement is straight forward- providing the best irrespective of the Quantity, Material of Construction or Value of Order. We do not shy away from small orders or customization. This way the client does not have to pay for a 100 pieces if he just wants to buy something in a single digit. If a client has to - does not mean - he needs to. We support our client to provide them with the best possible solution even if means customizing a product with a buying requirement of just 1. We stand true to our word and provide material as per the client's requirement, MOC - nearly all metals also PTFE, Quantity as per the client and Customization. Apart from this we also aim at reducing the cost for the client by active suggestions to them about using alternatives. There have been several efforts from us in helping our clients to change the product design which has paid them too well.
We provide and accept customization to reduce cost and increase productivity for the client. This proves to be extremely beneficial for the client.
We do not believe in providing a minimum supply to suit our sales. We rather provide small quantities to suit the client's budget. And not create unnecessary inventory for the clients.
We provide the minimum turn around time for most of the Tube Fittings.
COUNTRIES WE EXPORT NUT TO
All registered names, trademarks, copyrights and part numbers like Inconel®, Monel®, Hastelloy®, Zeron®, SMO® etc.,
remain the property of their respective owners. All use of OEM names, part, model and item numbers are for reference and identification purposes only.
TACTLOK is not an endorsed reseller or representative of any of above listed Materials / Brands or their respective products.
TACTLOK products do not infringe on Trade Marks Act 1995 or Copyright Act 1968, and to the best of our knowledge and through investigation we are not in contravention of any current patents